Home / Decoration / Steps on Making Your Own Washer-Dryer Pedestal
Steps on Making Your Own Washer-Dryer Pedestal

Steps on Making Your Own Washer-Dryer Pedestal

If you really want to learn more about how to make your own washer-dryer bases, it is extremely important to read this article for free. We will try to give you some tips on how to start and what to watch out for when looking for the right ways to make your own podiums in the future.

1 laundry base

Here are some of the materials you will need and the following steps:

Required materials

First of all, you need to make sure you have the following materials.

  • MDF or plywood (two 3/4 “panels)
  • Five 2 × 4 (8 feet long)
  • A 4 × 4 post about 4 feet long. If you don’t have any of these, use 2 2 x 4 posts that you can alternatively laminate together.
  • A base cap molding rod (6 feet long).
  • You also need to use four angle brackets

Additional tools

Here are some more tools you’ll need to finish the job: two and three inch screws, glue, finishing nails, wooden spatula and sandpaper. Apart from that, you also need some important tools like a tape measure, a square, pencils, safety glasses, a drill, the random orbital sander, a circular saw and a miter saw and much more. In addition, don’t forget to put on your protective gear if you plan to work on this project for a long time.

Bonus materials

Apart from the above, you should also have these bonus materials in order to make your podium successful without any problems. Some of these materials are as follows:

  • Brad Nailer
  • level
  • Countersink drill


After you have all the materials you need, you can continue with the actual construction. The first thing to think about when you want to make your own washer and dryer pedestal is the measurements. You have to make sure that the base definitely fits the machine itself.

2 washer-dryer bases

Next you need to recreate part of the floor for this project. You will need glue and some 3-inch screws. See the diagram above to see how it is done. Basically, you need to create double mini-floors for the base and central beams that can be placed on the lower floor. However, this last part is optional.

4 washer-dryer pedestals-2

The next step to focus on is decking. You can do this by screwing the plywood onto the two by four.

5 washer-dryer-base-3

Then you can start creating the corner angles. You can do this if you have an old washing machine that can be easily pushed out of the washroom if overloaded. Don’t worry, the angles are usually very cheap and affordable. You can use 2 inch screws to screw your machine in place.

6 washer-dryer-base-4

Attach the legs to the floor with the greatest support and screw it tight. For more security, add more screws and attach the machine to the walls and floors.

7 washer-dryer-base-5

For the ground floor, all you have to do is screw it down and use some glue so that the machine can be attached more securely.

8 washer-dryer pedestal-6

For the fairing, you need to make sure that it fits the legs exactly. To do this, you need to get the exact dimensions of the legs. Use a tape measure. In addition, you need to miter the fairing around your legs for a perfect fit.

9 washer-dryer-base-7

For a better look you can use another layer of plywood for the base. You can use a table saw and a wood filler for this.

Source: Ana White

About Biancha

Leave a Reply

Your email address will not be published. Required fields are marked *